求翻译：两端的光纤端面制备好后，启动熔接机开始熔接。启动熔接机后应观察光纤端面的图象，发现不合格立即中止熔接，重新制作端面。将熔接好的纤芯轻轻地从熔接机中取出，将加强保护管移至纤芯熔接部位。是什么意思？

Both ends of the fiber end preparation, start welding machine to weld. Start welding machine and should observe the image of the fiber end face, found substandard immediately suspend welding, re-create the end. Welding will be a good core gently removed from the welding machine, and will strengthen

Both ends of the fiber end face better prepared after the pick up and start Start fusing. After you pick up the fiber end face should be observed, the image is not qualified to immediately suspend found, re-face. The fused good core gently remove from the heat, and pick up the tube to enhance the pr

After the both sides optical fiber end surface prepares, starts the heat sealer to start to weld.After starts the heat sealer to be supposed to observe the optical fiber end surface the image, discovered is unqualified stops welding immediately, manufactures the end surface.Will weld the core takes

At each end of the fiber end face when preparing to start welding machines welding. Start the welding machine is to observe the optical fiber end face images found to be qualified to immediately suspend the weld, new face. Welding good fiber core gently removed from the welding machine, will be move

正在翻译，请等待...