求翻译：桩检测要求：(试验桩桩顶标高为：0.400m(试桩桩长比工程桩加长12m)，相对于绝对标高为:5.600m)。低应变动测：三桩或三桩以下的柱下承台抽检100%，其余抽查30%。抗拔桩100%.单桩竖向承载力检测采用静载荷试验堆载法，最大加荷量2730kN。检验桩数暂定为3根。试桩位置由相关单位现场确定。桩检测报告应及时提交设计院。抗拔桩应通过现场静载荷试验确定竖向抗拔承载力设计值，最大加荷量1500kN.试桩数量应不少于3根,抗拔桩试桩位置由相关单位现场确定.是什么意思？

Pile testing requirements: (test pile top elevation: 0.400m (test pile length works Pile lengthened 12m), relative to the absolute elevation: 5.600m). Low strain dynamic testing: three or three of the following column, pile cap sampling 100 percent, and the remaining checks 30%. Uplift pile 100% det

Pile Test requirements: (experimental pile pile top elevation is: 0.400 m long (try plunging more than 12 projects piling up the M), compared to an absolute elevation: 5.600 M). Changes should be low: 3 or 3 piles piles under the following column by 100 per cent inspection stations, and the remainin

Pile examination request: (The test pile head of pile elevation is: 0.400m (test pile pile long lengthens 12m compared to project pile), is opposite in the absolute level is: 5.600m).Low should change measured that,Three piles or under three pile following columns receives Taiwan to spot-check 100%,

Pile testing requirements: (test of pile top elevation: 0.400m (test pile length longer than the pile and 12m), relative to the absolute elevation: 5.600m). Low strain dynamic test: three or three columns through sampling 100%, remaining on those 30%. Uplift piles 100%. test of vertical bearing capa

正在翻译，请等待...