求翻译：a. 按下“品种1”按钮，跳出密码登入界面“log on”，原始登入密码为123123输入密码后，按下“品种1”按钮后跳出品种1参数设置界面（如图4），设置工件节拍、托盘直径、间距、以及个数。如：设置托盘直径点击托盘直径右边的黑色对话框！设置相应参数。是什么意思？

a. press the "variety" button, and out of the password to login screen "log on", the original password for the 123 123 to enter a password, press the "varieties" button out of varieties of parameter setting interface (Figure 4), set the workpiece beat tray diameter, spacing, and number. : Set the tr

. * A Press the " 1" button, type password to log into the pop up screen of the " log on and the original log in a password for 123,123 after entering your password, press the " 1" button varieties varieties out after 1 parameter settings interface (as shown in Figure 4, set the workpiece carrier be

a. Presses down “the variety 1” the button, jumps out the password to record the contact surface “log on”, after records the password is primitively 123123 input passwords, after presses down “the variety 1” the button to jump out the variety 1 parameter establishment contact surface (e.g. Figure 4)

A. pressing the "1" button to jump out of the password login interface "log on", after the original login password enter the password for 123,123, pressing the "1" button jumped out of the 1 parameter interface (Figure 4), set the rhythm, the workpiece diameter and spacing, as well as the number of

正在翻译，请等待...