求翻译：7、光纤可多次重复使用，如出光功率有损耗，用光纤剥离器剥去光纤输出末端外皮后，将裸露的石英部分放在坚硬的干净物体上，用光纤切割刀垂直在光纤轴面上划一条印痕，后用镊子或手轻轻掰断损坏的部分,切面应平整。是什么意思？

7, the optical fiber can be repeatedly reused, such as the optical power loss, fiber stripper stripped optical fiber output end of the sheath, the bare part of the quartz on the hard, clean objects, fiber cutter vertical surface in the fiber axis a program prints, tweezers or hand after gently snapp

7, the fiber can be reused many times, such as the optical power loss, the fiber stripper, peel off the backing from fiber optic output, at the end, after the bare skin of the quartz part on a hard object, use clean fiber cut vertical at the fiber-axis-Scribe a mark, use tweezers or your hands gentl

7th, the optical fiber may duplicate many times uses, if the luminous power has the loss, rips the optical fiber output terminal cover after the optical fiber stripper, will expose the quartz part will place on the hard clean object, will be vertical with the optical fiber cutting-off tool in the op

7, fibre can be reused multiple times, such as the optical power loss, using the fiber stripped stripped end of the fiber output after the jacket, the bare parts of quartz on the clean, hard objects, using optical fiber Cleaver imprint the vertical in the fiber axis, surface uniformity, use tweezers

正在翻译，请等待...