求翻译：若砼表面出现局部小面积蜂窝或麻面时，在拆模后用水泥砂浆将其补平，细砂直径控制在0.5mm以内，水灰比为0.3，砂浆按水泥：砂=1:3进行配制。砼表面H螺母孔眼也应用水泥砂浆补平。是什么意思？

If the concrete surface or a partial small area of ​​cellular Ma faces, with cement mortar in the form removal after its fill level, sand control in less than 0.5mm in diameter, water-cement ratio of 0.3, according to the cement mortar: sand = 1:3 for preparation. Concrete surface H nut hole is also

aerated concrete surface if a partial small area, cellular or to the Commission after the removal in cement mortar will supplement its surface, sand control in diameter 0.5 mm or less, the water cement ratio to 0.3 by cement, mortar, sand = 1 : 3 preparation. aerated concrete surface H nut holes als

If tong the surface appears time the partial small area honeycomb or the pockmarked face, the water used soil mortar makes up evenly after the form removal it, the granulated sugar diameter control in 0.5mm, the water ratio is 0.3, mortar according to cement: Granulated substance =1: 3 carries on th

When there are local small honeycomb and pockmark on concrete surface, after removing mold with cement mortar to fill it, and diameter of sand control in 0.5mm, the ratio is 0.3, mortar on cement: sand =1:3 preparation. H nut holes also applied cement mortar on concrete surface fill.

If the concrete surface or a partial small area of ​​cellular Ma faces, with cement mortar in the form removal after its fill level, sand control in less than 0.5mm in diameter, water-cement ratio of 0.3, according to the cement mortar: sand = 1:3 for preparation. Concrete surface H nut hole is also