|
关注：1
2013-05-23 12:21
求翻译：在罩壳右下角需要在墙板上钻一个φ5.2的孔，无需钻透，然后攻M6的螺纹，然后拧上M6X12外六角螺钉，并拧紧。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
在罩壳右下角需要在墙板上钻一个φ5.2的孔，无需钻透，然后攻M6的螺纹，然后拧上M6X12外六角螺钉，并拧紧。
问题补充： |
|
2013-05-23 12:21:38
Casing the lower right corner in the wall to drill a φ5.2 the hole, without the need to drill through, and then attack the m6 thread, then tighten m6x12 outer hexagonal screws and tighten.
|
|
2013-05-23 12:23:18
hood in the lower right-hand corner on the wall panel to drill a hole should be 5.2 with no drilling and tapping M 6 of the thread, and then screw on M X 6 12, 6, and then tighten the screws.
|
|
2013-05-23 12:24:58
Needs to drill a φ5.2 hole in the lagging right under angle on the wall plate, does not need to bore through, then attacks M6 the thread, then twists outside M6X12 the hexagon bolt, and screws tight.
|
|
2013-05-23 12:26:38
In the right corner of the cover need to drill a φ 5.2 holes in the wall, no need to drill through, and then tapping M6 threaded and screw M6X12 Hexagon screws, and tighten.
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
