求翻译：在机身后侧的金属走线槽的右下部的孔装一个PG16黑色双孔塑料管接头，并把有两根电缆的移动按钮线穿入管接头至金属走线槽，拧紧下面的管接头，把黑色穿线管的边缘锁紧，然后一根电缆往机头方向，穿过机脚的方孔。把只有一根电缆的移动按钮的穿线管固定在金属走线线槽的左边的开孔处。是什么意思？

Hole in the lower right of the rear side of the fuselage metal Wireway installed a pg16 black holes plastic fittings, and move the button line of the two cable penetration fittings to the metal wire tray, twist tight fittings of the following black pipe threading edge of the lock, then a cable to th

After the bodywork on the metal side of the slot at the bottom right edge of the hole with a black double-hole PG 16 plastic pipe fittings, and the two cables have the MOVE button line passes through the pipe to the metal went online slots, and tighten the hose below the black line through the Edge

正在翻译，请等待...

After the fuselage side of holes in the bottom-right of the metal line slot loaded a double hole PG16 black plastic pipe joints and move button line has two cables into the fitting to metal line slot, tighten the fitting below, edges of the stuffing tube black locks, head direction and then a cable

Walks the trunking right lower part hole in the fuselage rear end metal to install a PG16 black diplopore plastic pipe connection, and has two electric cable motion button lines to penetrate to walk the trunking the pipe connection to the metal, screws tight following pipe connection, threads the bl