当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:先把主电机接线盒盖打开,拆下临时试车地电机线,把主电机线W11111从机身后侧金属走线槽经过机头机脚的方孔,穿入主电机接线盒,然后接好(三角形接法),把接线盒下方的金属管接头拧紧。把接线盒的盖子装好,拧紧螺钉。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
先把主电机接线盒盖打开,拆下临时试车地电机线,把主电机线W11111从机身后侧金属走线槽经过机头机脚的方孔,穿入主电机接线盒,然后接好(三角形接法),把接线盒下方的金属管接头拧紧。把接线盒的盖子装好,拧紧螺钉。
问题补充:

  • 匿名
2013-05-23 12:21:38
First main motor terminal box cover open, remove the temporary test motor line, the main electrical line w11111 go trough a square hole through the nose and feet from the fuselage rear metal, wearing the White motor terminal box, and then connected (Delta Connection), tighten the junction box below
  • 匿名
2013-05-23 12:23:18
First of all the motor terminal box door is open, remove the temporary test to motor line, the main motor-from the fuselage after 11,111 W metal side go machine online slot as a result of the Parties and the pin hole, through the main motor terminal box, and then pick up (3 triangle to law), the jun
  • 匿名
2013-05-23 12:24:58
Turns on first the host electrical machinery wiring lid, dismantles the temporary test run terrestrial electricity equipment and lines, walks the trunking host electricity equipment and lines W11111 from the fuselage rear end metal after the nose undercarriage square edged orifice, penetrates the ma
  • 匿名
2013-05-23 12:26:38
Main motor terminal block cover first open and remove the temporary test the motor wires, from the back side of the fuselage main electric cable W11111 metal Cabling Channel after a foot square hole in the nose, put into the motor terminal box, then good (Delta-connection), tighten the metal fitting
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭