求翻译：从图3.3可以看出本实验的最佳聚合温度为40℃, 因为温度太低不利于引发剂的分解, 产生的活性自由基较少,不利于接枝率的增加, 产生的高分子链太长, 导致产品的吸水率降低, 但超过40℃后, 由于链转移和链终止反应的加快, 使接枝聚合率下降, 从而使吸水率降低[108]。是什么意思？

It can be seen from Figure 3.3 in this experiment the best polymerization temperature is 40 ℃, because the temperature is too low is not conducive to the decomposition of initiator, the activity of free radicals produced less, not conducive to the graft yield increases, resulting in the polymer chai

正在翻译，请等待...

3.3 may see this experimental from Figure the best polymerization temperature for 40℃, because the temperature too is low does not favor the initiator the decomposition, produces the active free radical are few, does not favor the stem grafting rate increase, produces the high polymer chain too is l

From Figure 3.3 can see this experimental of best aggregate temperature for 40 ℃, because temperature too low does not conducive to raised agent of decomposition, produced of activity free base less, does not conducive to received branch rate of increased, produced of polymer chain too long, led pro

3.3 may see this experimental from Figure the best polymerization temperature for 40℃, because the temperature too is low does not favor the initiator the decomposition, produces the active free radical are few, does not favor the stem grafting rate increase, produces the high polymer chain too is l