求翻译：3、 消防员灭火防护靴, 满足现行标准。 靴面不应有起皱、 砂眼、 杂质、 气泡、 疙瘩硬粒、 亮油擦伤现象。 靴面与夹里布、 内底布以及防砸内包头衬垫应平整, 不应有脱壳现象。 不应有脱齿弹边、 脱空、 开胶、 咦霜、 过硫和欠硫现象。 脚码符合国家标准要求°是什么意思？

3, firemen fire protective boots to meet the current standards. Boots should not be wrinkled face, trachoma, impurities, bubbles, knots durum, light oil abrasions. Surface and cloth boots folder, inside the base fabric and the drop in anti-header liner should be smooth and should not be shelling phe

3, fire extinguishing protective boots, meet current standards. There should be no wrinkle boot, trachoma, impurity, bubbles, lumps hard particles and bright oil abrasions. Boot folder with the floor, as well as the defense against the formation, Baotou cushioning should not be milled phenomenon. ro

3rd, the fire fighter fights fire the protection boots, satisfies the present standard. The boots surface should not have the corrugation, the trachoma, the impurity, the air bubble, the lump shot, the polishing oil abrasion phenomenon. In the boots surface with clamps linings, in the backing cloth

3, firemen fire fighting protective boots to meet current standards. Shoe surface should not have wrinkles, Chlamydia trachomatis, impurities, bubbles, keloid durum, light oil scraped. Boots and the fabric, neidibu and anti-hit with header gaskets should be formed, there should be no shelling. There

3rd, the fire fighter fights fire the protection boots, satisfies the present standard. The boots surface should not have the corrugation, the trachoma, the impurity, the air bubble, the lump shot, the polishing oil abrasion phenomenon. In the boots surface with clamps linings, in the backing cloth