|
关注:1
2013-05-23 12:21
求翻译:Fig.3shows the HRC hardness at different Tempering temperatures.The hardness increased With increasing temperature until.The initial at 500 ℃ Hardness of T1and T2is 29HRC and 33HRC respectively After tempering at different temperatures for 3h, the hardness (HRC) of the two kinds of samples Can increase T2show the simil是什么意思?![]() ![]() Fig.3shows the HRC hardness at different Tempering temperatures.The hardness increased With increasing temperature until.The initial at 500 ℃ Hardness of T1and T2is 29HRC and 33HRC respectively After tempering at different temperatures for 3h, the hardness (HRC) of the two kinds of samples Can increase T2show the simil
问题补充: |
|
2013-05-23 12:21:38
正在翻译,请等待...
|
|
2013-05-23 12:23:18
Fig.3shows在不同的回火温度的HRC坚硬。坚硬增加随着温度的增加直到。在T1and分别在磨炼的T2is 29HRC和33HRC的500 ℃坚硬的最初在3h的不同的温度以后,坚硬(HRC)这两样品可能增加T2show相似的26.T1and坚硬变异。当回火温度是大约600 ℃时,坚硬减少的Strongly.The高峰坚硬(HRC) T1and T2是37and 35respectively
|
|
2013-05-23 12:24:58
Fig.3shows HRC坚硬在不同的回火温度。坚硬增加随着温度的增加直到。最初在T1and T2is 29HRC和33HRC的500 ℃坚硬分别在磨炼在不同的温度以后为3h,这二 (的) 坚硬HRC样品可能增加T2show相似的26.T1and坚硬变异。当回火温度是大约600 ℃时, T1and T2的坚硬减少的Strongly.The (高峰) 坚硬HRC是37and 35respectively
|
|
2013-05-23 12:26:38
Fig.3shows HRC 硬度不同钢化温度。硬度增加,直到温度的增加。最初在 500 ℃ 硬度的 T1and T2is 29HRC 和 33HRC 分别为 3 h,硬度 (HRC) 的样本的两种不同温度下回火后可以增加 T2show 类似 26.T1and 硬度的变异。当回火温度是大约 600 ℃ 时,硬度下降 T1and T2 是 37and 35respectively 的 Strongly.The 峰值的硬度 (HRC)
|
|
2013-05-23 12:28:18
正在翻译,请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区