|
关注：1
2013-05-23 12:21
求翻译：When parameters are selected in the range of drooping area (arc force current is 0), the penetration becomes deep, the reinforcement becomes low and the weld becomes wide.Increasing welding current, the penetration becomes deep and the weld becomes wide是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
When parameters are selected in the range of drooping area (arc force current is 0), the penetration becomes deep, the reinforcement becomes low and the weld becomes wide.Increasing welding current, the penetration becomes deep and the weld becomes wide
问题补充： |
|
2013-05-23 12:21:38
当参数在下垂区（电弧力电流为0 ）的范围内选择，渗透变深，加强变低，焊缝变得wide.Increasing焊接电流，渗透变深和焊缝变宽
|
|
2013-05-23 12:23:18
当参量被选择在下垂的区域范围内(弧力量潮流是0)时，渗透成为深深，增强变得低，并且焊接宽成为。增长的焊接电流，渗透变得深，并且焊接宽成为
|
|
2013-05-23 12:24:58
当参量被选择在下垂的区域 (弧力量潮流范围内是0时)，渗透成为深深，增强变得低，并且焊接宽成为。增长的焊接电流，渗透变得深，并且焊接宽成为
|
|
2013-05-23 12:26:38
当下垂区域的范围中选择参数 （弧部队当前为 0），渗透变得深、 加固变得低和焊缝变得宽。增加焊接电流、 渗透变得深和焊缝变得宽
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
