|
关注：1
2013-05-23 12:21
求翻译：cast defect is allowed to eliminated with welding followed by thermal treatment if they weaken detail cross-section by not more than 30% and without subsequent thermal treatment if they weaken detail cross-section by not more than 15% and volume of seperate weld deposits does not exceed 5 cm是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
cast defect is allowed to eliminated with welding followed by thermal treatment if they weaken detail cross-section by not more than 30% and without subsequent thermal treatment if they weaken detail cross-section by not more than 15% and volume of seperate weld deposits does not exceed 5 cm
问题补充： |
|
2013-05-23 12:21:38
铸造缺陷允许用焊后热处理，如果它们的横截面以不超过30％和不如果他们由不超过15％，单独的焊接熔敷的体积削弱细节截面后续热处理削弱细节消除不
|
|
2013-05-23 12:23:18
塑象瑕疵允许对消灭与热量治疗跟随的焊接，如果他们减弱细节横断面由不超过30%和，不用随后热量治疗，如果他们减弱细节横断面由不超过15%，并且分开的焊接储蓄的容量不超过5 cm
|
|
2013-05-23 12:24:58
塑像瑕疵允许对消灭与热量治疗跟随的焊接，如果他们减弱细节横断面不超过30%和，不用随后热量治疗，如果他们减弱细节横断面由不超过15%，并且分开的焊接储蓄的容量不超出5 cm
|
|
2013-05-23 12:26:38
铸造缺陷允许取消与焊接其次热治疗，如果他们削弱详细截面不超过 30%和没有随后热治疗如果他们削弱详细截面不超过 15%，单独焊缝存款量不超过 5 厘米
|
|
2013-05-23 12:28:18
投缺陷被允许消除通过焊接接着是热治疗如果他们使详细信息变弱把分割成截面没有后续热治疗地和通过不多于 30% 如果他们使详细信息变弱把分割成截面通过不多于 15% 和 seperate 的成团升起焊接押金不超过 5 厘米
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
