|
关注：1
2013-05-23 12:21
求翻译：One step is generated for each negative edge of the STEP signal. In half-step mode, two pulses will be required to move one full step. Notice the set up time, ts, of DIR and HSM signals. These signals must be latched during the negative edge of STEP, see timing diagram, figure 6.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
One step is generated for each negative edge of the STEP signal. In half-step mode, two pulses will be required to move one full step. Notice the set up time, ts, of DIR and HSM signals. These signals must be latched during the negative edge of STEP, see timing diagram, figure 6.
问题补充： |
|
2013-05-23 12:21:38
对于阶跃信号的每个下降沿，产生一个步骤。
|
|
2013-05-23 12:23:18
一步为步信号的每负沿引起。在半步方式下，两脉冲将要求移动一充分的步。注意设定时间，实验装置， DIR和HSM信号。必须锁上在步期间，负沿这些信号，看定时图表，图6。
|
|
2013-05-23 12:24:58
正在翻译，请等待...
|
|
2013-05-23 12:26:38
一步生成的阶跃信号每个消极的边缘。在半步模式下，两个脉冲将需搬迁一个完整的步骤。注意到成立时间，ts，DIR 和 HSM 信号。这些信号必须在消极的步骤，请参阅的时序图，图 6 边缘期间锁存。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
