|
关注：1
2013-05-23 12:21
求翻译：调整模具上下高度，使端子冲压后松紧适合，端子压接后抗涨强度安下表进行1分钟不松动，不脱落是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
调整模具上下高度，使端子冲压后松紧适合，端子压接后抗涨强度安下表进行1分钟不松动，不脱落
问题补充： |
|
2013-05-23 12:21:38
Up and down height adjustment of the mold, so that after punching terminals for tightness, crimping strength of security after the anti-up table for 1 minute is not loose, not off
|
|
2013-05-23 12:23:18
Mold height adjustment up and down, so that end son after punching elastic, suitable for anti-India after receiving terminal pressure intensity for 1 minutes on the table is not loose, do not fall off
|
|
2013-05-23 12:24:58
Adjusts about the mold the altitude, after causes the post ramming the loose and tight to suit, after the post compression connection anti-rises the intensity to install the table to carry on 1 minute not to become less crowded, does not fall off
|
|
2013-05-23 12:26:38
Adjustment die height, Terminal after being punched loose fit, Terminal crimping back-up strength and attention to the following table for 1 minute is not loose, do not fall off
|
|
2013-05-23 12:28:18
Adjustment die height, Terminal after being punched loose fit, Terminal crimping back-up strength and attention to the following table for 1 minute is not loose, do not fall off
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
