|
关注:1
2013-05-23 12:21
求翻译:If the DUT contains CAN communications, the circuits illustrated in Figure F-2 shall be located within the Load Simulator. Configuration A shall be used for devices that contain internal CAN bus termination. Configuration B shall be used for devices that contain no termination.是什么意思?![]() ![]() If the DUT contains CAN communications, the circuits illustrated in Figure F-2 shall be located within the Load Simulator. Configuration A shall be used for devices that contain internal CAN bus termination. Configuration B shall be used for devices that contain no termination.
问题补充: |
|
2013-05-23 12:21:38
如果DUT包含CAN通信,如图F- 2所示的电路应设在负载模拟器。
|
|
2013-05-23 12:23:18
如果DUT包含能通信,在图说明的电路F-2在装载模拟器内将位于。配置A为包含内部罐头公共汽车终止的设备将使用。配置B为不包含终止的设备将使用。
|
|
2013-05-23 12:24:58
如果DUT包含能通信,在图说明的电路F-2在装载模拟器之内将位于。 配置A为包含内部罐头公共汽车终止的设备将使用。 配置B为不包含终止的设备将使用。
|
|
2013-05-23 12:26:38
如果 DUT 包含 CAN 通信,在图 F-2 所示的电路应位于负载模拟器。应使用配置一个设备包含内部的 CAN 总线终止。配置 B 不得用于包含没有终止的设备。
|
|
2013-05-23 12:28:18
如果 DUT 包含可以通信,电路说明在数字中 F-2 将是在负荷的模拟器内被查找的 。A 将用于的配置包含的设备内部可以公共汽车终止。B 将用于的配置没包含终止的设备。
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区