|
关注：1
2013-05-23 12:21
求翻译：Increasing the 刀片 distribution voltage to 48V now requires a 48-12 母线 converter for the 12V auxiliary 负载, resulting in lower 效率 for that particular 负载. 不过, this is more than compensated for by the fact that the board 配电损耗 drop from 19.2W to 1.1W with the increase in distribution voltage.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Increasing the 刀片 distribution voltage to 48V now requires a 48-12 母线 converter for the 12V auxiliary 负载, resulting in lower 效率 for that particular 负载. 不过, this is more than compensated for by the fact that the board 配电损耗 drop from 19.2W to 1.1W with the increase in distribution voltage.
问题补充： |
|
2013-05-23 12:21:38
增加刀片分配电压48V ，现在需要一个48-12母线转换为12V辅助负载，从而降低了效率为特定负载。
|
|
2013-05-23 12:23:18
增加刀片发行电压对48V为12V辅助负载现在要求一台48-12母线交换器，造成那特殊负载的更低的效率。不过，这的事实更比由那补尝委员会配电损耗下落从19.2W到与增量的1.1W在发行电压。
|
|
2013-05-23 12:24:58
Increasing the 刀片 distribution voltage to 48V now requires a 48-12 母线 converter for the 12V auxiliary 负载, resulting in lower 效率 for that particular 负载. 不过, this is more than compensated for by the fact that the board 配电损耗 drop from 19.2W to 1.1W with the increase in distribution voltage.
|
|
2013-05-23 12:26:38
现在增加到 48V 刀片配电电压为 12V 辅助负载，导致低效率为该特定的负载需 48 12 母线变流器。我们喜欢他，这是比由板配电损耗从 19.2W 降到 1.1W 与分布电压上升的事实来弥补。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
