当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:The maximum principal stress of the initial lining are mainly distributed on both sides of the arch at the waist in the conditions I and II, and the condition II is larger than the area occupied by the maximum condition I, the minimum principal stress mainly in the guide hole in the wall and dome bottom; by rock stress是什么意思?

待解决 悬赏分:1 - 离问题结束还有
The maximum principal stress of the initial lining are mainly distributed on both sides of the arch at the waist in the conditions I and II, and the condition II is larger than the area occupied by the maximum condition I, the minimum principal stress mainly in the guide hole in the wall and dome bottom; by rock stress
问题补充:

  • 匿名
2013-05-23 12:21:38
初始衬里的最大主应力主要分布在拱形的两侧处的条件Ⅰ和Ⅱ的腰部,并且条件II是小于由最大条件I,最​​小主应力主要是在所占用的面积大
  • 匿名
2013-05-23 12:23:18
这, 那; 这些, 那些
  • 匿名
2013-05-23 12:24:58
最初的衬里的最大主应力在条件主要被分布在曲拱的两边在腰部I和II,并且情况II大于最大情况占领的区域I,极小的主应力主要在指南孔在墙壁和圆顶底部; 由岩石重音形象展示在垂直的重音和垂直的位移条件附近我分别为7.7MPa和少于20mm和23mm II8.0MPa条件; 从塑料区域、塑料区域I的工作环境主要在腰部在曲拱的两边和墙壁在上面,工作环境位于侧面墙的II塑料区域和曲拱的边偏心的上面腰部,塑料区域发行情况I是大于工作环境II,但在偏压侧面墙的上部集中的塑料区域II现象的工作环境; 最大轴向力在情况我遭受了左曲拱出现于左肩膀的螺栓孔, 327kN最大值。 然而,在工作环境II,船锚遭受了最大轴
  • 匿名
2013-05-23 12:26:38
正在翻译,请等待...
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭