|
关注：1
2013-05-23 12:21
求翻译：当板厚大于10mm且小于等于25mm时，应从每条纵向焊缝中任取2个长度为300mm的焊缝进行射线检测，其中一个位置应靠近底板；当板厚大于25mm时，每条焊缝应进行100%射线检测。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
当板厚大于10mm且小于等于25mm时，应从每条纵向焊缝中任取2个长度为300mm的焊缝进行射线检测，其中一个位置应靠近底板；当板厚大于25mm时，每条焊缝应进行100%射线检测。
问题补充： |
|
2013-05-23 12:21:38
When the thickness of less than 10mm and 25mm , the longitudinal welds should each take two to any length to 300mm of weld -ray detection , one location should be near the floor ; when the thickness is greater than 25mm, each weld
|
|
2013-05-23 12:23:18
正在翻译，请等待...
|
|
2013-05-23 12:24:58
When the thickness of slab is bigger than 10mm also is smaller than is equal to 25mm, should from each longitudinal welded joint no matter what takes 2 lengths is the 300mm welded joint carries on the beam examination, position should approach the ledger wall; When the thickness of slab is bigger th
|
|
2013-05-23 12:26:38
正在翻译，请等待...
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
