|
关注：1
2013-05-23 12:21
求翻译：An electrochemical pre-treatment was applied to the NiPd particles to form Ni hydroxide on the surface, being the electro-active species for ammonia oxidation [17,18]. This was performed by carrying out 200 cyclic voltammograms in 1 M NaNO3 at pH 9 in the voltage range 0.95 to þ1.35 V at 100 mV s1. Under alkaline con是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
An electrochemical pre-treatment was applied to the NiPd particles to form Ni hydroxide on the surface, being the electro-active species for ammonia oxidation [17,18]. This was performed by carrying out 200 cyclic voltammograms in 1 M NaNO3 at pH 9 in the voltage range 0.95 to þ1.35 V at 100 mV s1. Under alkaline con
问题补充： |
|
2013-05-23 12:21:38
电化学预处理施加到NIPD颗粒以形成镍氢氧化物的表面上，作为电活性物种为氨氧化[17,18] 。
|
|
2013-05-23 12:23:18
正在翻译，请等待...
|
|
2013-05-23 12:24:58
电化学预处理在表面被申请了于NiPd微粒对形式Ni氢氧化，是电镀物品活跃种类为氨氧化作用 (17,18)。 这通过执行200循环voltammograms执行在1 M NaNO3在酸碱度9在电压范围 0.95到þ1.35 v在100 mV s 1。 在碱性情况下，在氢氧化形成区域， OH 的dsorption在Ni导致它的氧化作用和阶段的形成Ni( OH) 2这样
|
|
2013-05-23 12:26:38
电化学预处理采用钯粒子对窗体镍氢氧化铝表面上看，被电活性物种为氨氧化 [17，18]。这是通过开展 200 循环伏安法在 1 M NaNO3 在 ph 值 9 至 þ1.35 V 以 100 mV s 1 0.95 电压范围内执行。在氢氧化形成区域，碱性条件下哦 ni 为由导致其氧化和一相的 Ni (OH) 2 的形成，
|
|
2013-05-23 12:28:18
电气化学的治疗前被应用到 NiPd 微粒在表面上形成 Ni 氢氧化物，是用于氨氧化的电活动种类 (17， 18)。This was performed by carrying out 200 cyclic voltammograms in 1 M NaNO3 at pH 9 in the voltage range 0.95 to ?1.35 V at 100 mV s1.Under alkaline conditions, in the hydroxide formation region, the a dsorption of OH on Ni leads to its oxidat
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
