求翻译：纏繞法:(此法適用於 AWG 14〜30 者)取約 120cm 長之試片,將一端固定於儀器中所規定之捲軸上,以5〜10rpm的速度及表7規定的荷重捲繞於捲軸上 3 匝後將剩餘之試片剪斷剩約 12mm,將此剩餘線頭在刻劃 0 點位置曲折成直角,延著捲軸慢慢地釋放試片直至其停止並讀取其值。是什么意思？

Winding method :( This law applies to AWG 14~30 person ) take about 120cm length of the specimen , one end fixed to the instrument as specified in the spool to speed 5~10rpm the load and Table 7 of the wound on reel

Winding Law (the law applies to AWG 14 30 share) taken about 120 cm long test pieces, will end fixed to equipment, called the provisions of axis to 5 share 10 rpm of speed and table 7 provisions of the particular called load called the axis 3 test after test of the remaining pieces cut the remaining

Winding law: (This law is suitable in AWG 14 〜 30) takes approximately the 120cm long preview, fixes an end in the instrument reel of on the stipulation, stipulation load capacity coiling 3 circles the surplus preview shear will remain approximately 12mm by 5 〜 10rpm speeds and Table 7 after the ree

Winding method: (this method applies Yu AWG 14 ~ the 30 who) take about 120cm long of try tablets, will end fixed Yu instrument in the by provides of scroll article Shang, to 5 ~ the 10rpm of speed and the table 7 provides of load winding Yu scroll article Shang 3 turns Hou will remaining of try tab

正在翻译，请等待...