|
关注:1
2013-05-23 12:21
求翻译:Using a mechanical chiller system for inlet cooling is the second method under investigation in this study. The method as shown schematically in Fig. 2 is used to cool the inlet air through a heat exchanger installed in the gas turbine inlet filter house. The coolant in the heat exchanger may be the refrigerant itself 是什么意思?![]() ![]() Using a mechanical chiller system for inlet cooling is the second method under investigation in this study. The method as shown schematically in Fig. 2 is used to cool the inlet air through a heat exchanger installed in the gas turbine inlet filter house. The coolant in the heat exchanger may be the refrigerant itself
问题补充: |
|
2013-05-23 12:21:38
使用为入口冷却机械冷却器系统正在调查在本研究第二种方法。
|
|
2013-05-23 12:23:18
使用机械冷却系统进气口冷却是第二种方法在本次研究中调查。 如图所示的方法示意图图中。 2是用来冷却空气通过热交换器安装在燃气涡轮进气过滤器。 冷却液在热交换器可能是制冷剂本身或辅助液通常是水(在这里)。
|
|
2013-05-23 12:24:58
使用机械致冷物系统为入口冷却是第二个方法在调查之中在这项研究中。 方法如所示概要地在。 2用于通过在燃气轮机入口过滤器房子安装的热转换器冷却入口空气。 蓄冷剂在热转换器也许通常是冷冻剂或次要流体水 (作为这里)。 系统比蒸发中型系统更多有效和可靠的,因为它可能减少入口温度,和设计师欲望不管四周湿球温度,但它更expen- sive实施一样多。 有二种基本成分在系统如下:
|
|
2013-05-23 12:26:38
用机械制冷系统进气冷却是第二种方法进行这项研究调查。如图 2 所示的方法用来冷却通过热交换器安装在燃气轮机进气过滤器房子的空气进口。在换热器冷却可能是制冷剂本身或二级液体通常水 (作为这里)。制度是更加有效和可靠比蒸发的媒体系统,因为这样可以减低入口温度一样的设计师的欲望,无论周围的湿球温度,但它是更贵为执行。如下所示的系统中有两个基本组件:
|
|
2013-05-23 12:28:18
正在翻译,请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区