|
关注:1
2013-05-23 12:21
求翻译:Before setting the samples, we measured the initial OPD of the interferometer. We moved vibrating mirror along the optical axis and located it at the position where the OPD was about 10 mm, so the voltage of the output signal P(t) of SPS was not too small. Next, we placed the transparent plate between the collimator a是什么意思?![]() ![]() Before setting the samples, we measured the initial OPD of the interferometer. We moved vibrating mirror along the optical axis and located it at the position where the OPD was about 10 mm, so the voltage of the output signal P(t) of SPS was not too small. Next, we placed the transparent plate between the collimator a
问题补充: |
|
2013-05-23 12:21:38
前设置的样品中,我们测量干涉仪的初始OPD 。
|
|
2013-05-23 12:23:18
设置前的样本,我们测量了初始的opd的射电干涉仪。 我们已将振动镜像沿光轴和它的位置的位置是opd引起约10mm,因此电压的输出信号P(T)的SPS不太小。 下一步,我们之间的透明板的准直器和镜像。
|
|
2013-05-23 12:24:58
在设置样品之前,我们测量了干涉仪的最初的OPD。 我们移动了振动的镜子沿光纤轴并且找出它在位置, OPD是大约10毫米,因此输出信号P SPS t的(电压) 不是太小的。 其次,我们安置了透明板材在准直仪和镜子之间。
|
|
2013-05-23 12:26:38
在设置之前的样品,我们测量干涉仪首次门诊。我们搬沿光轴方向振动的镜子,它位于门诊在那里约 10 毫米,所以 P(t) 的 SPS 输出信号的电压并不是太小的位置。 接下来,我们放置透明板之间的准直器和镜子。
|
|
2013-05-23 12:28:18
在设置例子之前,我们测量 interferometre 的最初 OPD。我们移动沿着光学轴的振动镜子和在 OPD 是大约 10 毫米的位置查找它,这样产量的信号的电压 SPS 的 P(t) 不是太小的。下一个,我们放置校准者和镜子之间的透明盘子。
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区