|
关注：1
2013-05-23 12:21
求翻译：It was clear that where the starting position of the oil groove was located beyond 45º bearing angle, it would make little difference in the overall minimum oil film thickness. As the starting position shifted towards the bearing crown, the minimum oil film thickness was predicted to reduce. At between 45º to 30º beari是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
It was clear that where the starting position of the oil groove was located beyond 45º bearing angle, it would make little difference in the overall minimum oil film thickness. As the starting position shifted towards the bearing crown, the minimum oil film thickness was predicted to reduce. At between 45º to 30º beari
问题补充： |
|
2013-05-23 12:21:38
很明显，在油槽的起始位置是位于超出45°的方位角，这将使得在整个最小油膜厚度差别不大。
|
|
2013-05-23 12:23:18
正在翻译，请等待...
|
|
2013-05-23 12:24:58
正在翻译，请等待...
|
|
2013-05-23 12:26:38
很明显油沟的起始位置位置超出 45 º 轴承角度来看，它会使整体最小油膜厚度差异小。作为起始位置转向轴承冠，最小油膜厚度预计减少。在之间 45 º 30 º 轴承角，减少被证明是小。位置靠近冠，诱导相当大的变化。在最小油膜厚度，减少，对应的油膜压力预计增加。凹槽的起始位置的变化对几乎没有影响油膜形状和压力剖面章一半的轴承。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
