当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:Meanwhile, power meters must be highly accurate to measure power at the input and output of the equipment under test as it is not possible to measure losses directly. The losses are then calculated from both values. In the worst case, the errors of both measurements are opposite. This problem increases with the efficie是什么意思?

待解决 悬赏分:1 - 离问题结束还有
Meanwhile, power meters must be highly accurate to measure power at the input and output of the equipment under test as it is not possible to measure losses directly. The losses are then calculated from both values. In the worst case, the errors of both measurements are opposite. This problem increases with the efficie
问题补充:

  • 匿名
2013-05-23 12:21:38
同时,功率计必须高度精确测量功率在被测输入和设备的输出,因为它是不可能直接测量的损失。
  • 匿名
2013-05-23 12:23:18
另一方面,功率计必须高度准确地测量电源的输入和输出的设备在测试,不可能直接测量损失。 这次事故造成的损失是从计算两个值。 在最坏的情况下,错误的对面是两个测量值。 这一问题的效率与增加的负载。 电气驱动器有一个讲求效率约为95%,和逆变器最高可达99%。
  • 匿名
2013-05-23 12:24:58
同时,因为直接地,测量损失是不可能的力量米一定是高度准确的测量力量在设备的输入和输出在测试之下。 损失从两价值然后被计算。 在最坏,两次测量错误在对面。 这个问题增加以装载的效率。 电子驱动有效率大约95%和变换器由99%决定。 高精密度的仅仪器和电流传感器加上力量分析仪可能实现可靠和可接受的结果。
  • 匿名
2013-05-23 12:26:38
同时,电力仪表必须高度准确的测量在输入和输出受试设备的电源,因为它是不可能直接测量损失。然后从这两个值计算损失。测量结果的误差在最坏的情况相反。这一问题随负载的效率。电气传动有 95%左右和逆变器的效率高达 99%。只有高精密仪器和电流传感器加上电能质量分析仪可以提供可靠和可接受的结果。
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭