|
关注：1
2013-05-23 12:21
求翻译：No difficulties in vacuum filling were noted with LORD SC-320 despite its viscosity being somewhat higher than those of the epoxy and varnish. In addition, the potting compound was effective at decreasing the hot spot temperatures even when the potting was not 100-percent dense. For example, the hot-spot temperature of是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
No difficulties in vacuum filling were noted with LORD SC-320 despite its viscosity being somewhat higher than those of the epoxy and varnish. In addition, the potting compound was effective at decreasing the hot spot temperatures even when the potting was not 100-percent dense. For example, the hot-spot temperature of
问题补充： |
|
2013-05-23 12:21:38
在真空填充无困难者注意到耶和华的SC- 320 ，尽管它的粘度比那些环氧树脂和清漆的稍高。
|
|
2013-05-23 12:23:18
没有任何困难在真空填充了很多人的主SC320尽管在某种程度上它的粘度较高的环氧和清漆。 此外,灌封化合物是有效在减少热点温度即使在花盆里的是不100%密集。
|
|
2013-05-23 12:24:58
困难在真空装填那些未注意与SC-320阁下尽管它的黏度有些高于环氧和油漆。 另外，既使当装壶不是100百分之密集，装壶化合物是有效的在减少热点温度。 例如，热斑点温度马达盆与SC-320阁下仅3摄氏度增加的作为装壶密度从80百分之被减少了到50百分之，而19摄氏度增加的热点温度环氧和涂清漆盆的马达和25摄氏度，分别，作为他们的装壶密度从80降低了-百分之到50百分之。
|
|
2013-05-23 12:26:38
在真空充填不存在困难是主 SC 320 地注意到，尽管被略高于环氧树脂和清漆及其粘度。此外，灌封料是有效降低热点温度，甚至当灌封不是 100%密。例如，热点温度的电机盆栽与主 SC 320 增加由唯一的 3摄氏度作为灌封密度从 80%降至 50%，而环氧和清漆盆栽电机的热点温度增加了 19摄氏度和 25摄氏度，分别作为其灌封的密度由 80%降至 50%。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
