求翻译：1.在我司電測機上對不良品進行電測，發現确如客戶所述有缺畫現象（如圖1），在顯微鏡下觀察缺畫部分發現ITO被被蝕刻（如圖2），不良原因分析為前制程光刻膠在攪拌過程中產生氣泡，因停留時間較短，氣泡未消仍存在，在清洗工序時，PR氣泡被清洗掉，蝕刻時，此處的ITO被蝕刻掉造成缺畫。是什么意思？

1. Our measuring machine for measuring defective products were found to determine if the customer has a missing painting the phenomenon ( Figure 1) was observed under a microscope found missing painting part been etched ITO (Figure 2 ).

(1) In my secretary electronic measuring machine on the undesirable products for Electronic Measuring and found that 确 if customers, and in a shortage of painting phenomenon as shown in Figure 1), under a microscope observer shortage of paintings found ITO is to be etched as shown in Figure 2) that

1. takes charge of in the electrical measurement machine in me to not good to carry on the electrical measurement, discovered like the customer states firmly has lacks the picture phenomenon (e.g. Figure 1), observes under the microscope lacks the picture part to discover ITO by the etching (e.g. Fi

1. in our electric measuring machine Shang on bad products for Electric measuring, found does as customer by said has deficiency painting phenomenon (as Figure 1), in microscope Xia observation deficiency painting part found ITO was was etched (as Figure 2), bad reasons analysis for Qian business us

正在翻译，请等待...