|
关注：1
2013-05-23 12:21
求翻译：Apply a clamping pressure so that the top compression ring moves into the board to a depth as follows:\"A\" flute 2.08±0.05 mm（0.082±0.002 in）；“B” flute 0.810.05 mm(0.032+0.002 in).The specimen must not slip during the test.Apply the bursting pressure by forcing the piston forward until the diaphragm ruptures the speci是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Apply a clamping pressure so that the top compression ring moves into the board to a depth as follows:\"A\" flute 2.08±0.05 mm（0.082±0.002 in）；“B” flute 0.810.05 mm(0.032+0.002 in).The specimen must not slip during the test.Apply the bursting pressure by forcing the piston forward until the diaphragm ruptures the speci
问题补充： |
|
2013-05-23 12:21:38
施加夹紧压力，使得顶压缩环移动到所述板的深度如下：\ “A \ ”笛2.08 ±0.05毫米（ 0.082 ±0.002 ）;“ B”的笛0.810.05毫米（0.032 + 0.002在
|
|
2013-05-23 12:23:18
应用一个夹紧压力,使顶部压缩环移至主板,一个深度,如下所示:\"\"凹槽2±0.05±0.002mm（ in）；0"B"凹槽0.81毫米(0.032,0.002).样本必须在不打滑的测试.应用爆破压力,迫使活塞向前移动,直至其膜片破裂的标本.记录登记的最大压力。
|
|
2013-05-23 12:24:58
施加夹紧的压力，以便顶面压缩圆环搬入委员会向深度如下：\ “A \”长笛2.08±0.05毫米(0.082±0.002); “B”长笛0.810.05毫米(0.032+0.002寸)。在测试期间，标本不能滑倒。施加破裂的压力通过今后强迫活塞，直到膜片爆裂标本。记录登记的最大压力。
|
|
2013-05-23 12:26:38
Apply a clamping pressure so that the top compression ring moves into the board to a depth as follows:\"A\" flute 2.08±0.05 mm（0.082±0.002 in）；“B” flute 0.810.05 mm(0.032+0.002 in).The specimen must not slip during the test.Apply the bursting pressure by forcing the piston forward until the diaphrag
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
