|
关注：1
2013-05-23 12:21
求翻译：Received signal level too low: (1) check headphone and speaker plugs and cables; (2) make sure that MENU:RX EQ has not been set for large cuts; (3) verify that MENU:REF CAL is properly adjusted; (4) make sure RF gain is set to maximum; (5) preamp set to 10 dB rather than 20 dB (MENU:PREAMP).是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Received signal level too low: (1) check headphone and speaker plugs and cables; (2) make sure that MENU:RX EQ has not been set for large cuts; (3) verify that MENU:REF CAL is properly adjusted; (4) make sure RF gain is set to maximum; (5) preamp set to 10 dB rather than 20 dB (MENU:PREAMP).
问题补充： |
|
2013-05-23 12:21:38
正在翻译，请等待...
|
|
2013-05-23 12:23:18
收到的信号级别太低:(1)检查耳机和扬声器插头和电缆;(2)确保菜单:RX EQ尚未设置大规模减少;(3)确认菜单:参考校准调整是否正确;(4)确保射频增益设置为最大值;(5)前置放大器设置为10dB而不是20dB(菜单):前置放大器)。
|
|
2013-05-23 12:24:58
被接受的信号电平太低： (1) 检查耳机和报告人插座和缆绳; (2) 确信，菜单：RX EQ未为大裁减被设置; (3) 核实那份菜单：适当地调整REF CAL; (4) 确定RF获取被设置到最大值; (5) 前置放大器设置了到10 dB而不是20 dB (菜单：前置放大器)。
|
|
2013-05-23 12:26:38
收到信号电平太低: (1) 检查耳机和扬声器插头和电缆;(2) 确保该菜单: RX 情商尚未设置为大幅削减;(3) 验证菜单: REF CAL 适当的调整;(4) 作出肯定的射频增益设置到最大;(5) 前置放大器设置为 10 分贝，而不是 20 分贝 (菜单: 前置放大器)。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
