求翻译：在我司電測機上對客戶所述不良品進行電測，發現确如客戶所述有顯示淡不良現象（如圖1），對不良品進行剖片后在顯微鏡下觀察顯示淡部分，發現ITO被刮傷但沒有刮斷（如圖2）。造成圖像顯示淡的原因分析為，由於ITO被刮傷但沒有刮斷，導致阻值變大，造成圖像顯示淡。造成此不良的原因分析為，在進行完顯影工序後，生產人員會對產品進行抽檢，在抽檢過程中，由於不小心與物體發生碰擦，導致ITO被刮傷。是什么意思？

null

In respect the detected on the customer the poor quality for the detected that are for customers as described in a display light adverse effect (Figure 1), to poor quality for 剖 is enabled on the microscope the observation display light of discovered ITO scratched but did not shave up (Figure 2). Ca

Takes charge of in the electrical measurement machine in me to state not not good to the customer carries on the electrical measurement, discovered like the customer states firmly has demonstrated the pale undesirable tendency (e.g. Figure 1), after not good carries on splits the piece to observe un

In our measurement machine for measuring the defect by the customer, found as described in the customer has displayed poor light (Figure 1), to profile the bad products displayed under the microscope after a light part, ITO found is scratched but not blowing out (Figure 2). Contributed to the image

正在翻译，请等待...