求翻译：如果系统启动后，发现系统没有压力。此现象是由于液压油液清洁度不够，造成调压阀阀芯卡死。此时可以将溢流阀SBSG-03-1PN-D24（锁模）或SBSG-06-1PN-D24（快速）拆下清洗后重新装上即可。是什么意思？

If the system starts, that system is not pressure. This phenomenon is due to hydraulic fluid cleanliness is not enough, resulting in pressure regulator valve stuck. At this point can be relief SBSG-03-1PN-D24 (clamping) or SBSG-06-1PN-D24 (fast) removed can be cleaned and re-installed.

If the system startup, it was found that there was no pressure system. This is due to insufficient hydraulic oil cleanliness caused pressure valve spool. At this point can be operated relief valve SBSG PN - D - 03 - 1 24 (clamping) or SBSG PN - D - 06 - 1 24 (FAST) Removal of the re-installed after

正在翻译，请等待...

If the system is powered up, found no pressure system. This phenomenon is caused by hydraulic oil cleanliness is not enough, causing pressure regulating valve stuck. You can then overflow valve SBSG-03-1PN-D24 (lock mode) or SBSG-06-1PN-D24 (fast) with cleaning after replacing can be removed.

If the system is powered up, found no pressure system. This phenomenon is caused by hydraulic oil cleanliness is not enough, causing pressure regulating valve stuck. You can then overflow valve SBSG-03-1PN-D24 (lock mode) or SBSG-06-1PN-D24 (fast) with cleaning after replacing can be removed.