|
关注：1
2013-05-23 12:21
求翻译：由于该瑕疵是在高周波压合的时候产生的问题，所以建议工厂修改高周波模具，压面改成圆弧状或者作R角是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
由于该瑕疵是在高周波压合的时候产生的问题，所以建议工厂修改高周波模具，压面改成圆弧状或者作R角
问题补充： |
|
2013-05-23 12:21:38
Because the flaw is in the high frequency voltage generated when the problem together, it is proposed plant modification frequency mold, pressure surface into a circular shape or angle for R
|
|
2013-05-23 12:23:18
It is because of the defects in the high-frequency wave compression of the problems that arose when it was proposed that factory modified koshuha mold, put pressure on conversion-oriented underlain or R point
|
|
2013-05-23 12:24:58
Because this slight defect is press fits in the high frequency time produces question, therefore suggested the factory revision high frequency mold, the compression face alters to the circular arc shape or makes the R angle
|
|
2013-05-23 12:26:38
Because the flaw was in the high frequency pressure-when the issues raised, it is recommended that high frequency mould factory modified, pressure change for r-arc or angle
|
|
2013-05-23 12:28:18
Because the flaw was in the high frequency pressure-when the issues raised, it is recommended that high frequency mould factory modified, pressure change for r-arc or angle
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
