求翻译：变压器的铜损是指初次级导线的直流电阻造成的损耗，因此只需要将变压器上加上额定电流即可，具体操作是将二次线圈直接短接，在一次侧上加电压，直到电流为额定电流为止，测出此时的初级电压，此时的初级电压与额定电流的乘积即为铜耗。在高压侧做。是什么意思？

Transformer copper loss is the first-class conductor DC resistance caused by the loss, so just add on to the transformer rated current to the specific operation is directly shorted secondary coil, a voltage on the primary side, until the current rated current date, the primary voltage measured at th

The transformer losses copper wire is a subprogramme of the early DC power supply disruption caused by depletion of transformers, and therefore will only need to be coupled with rated current, specific operating is 2 times will be received, in a short coil directly on the side, until the voltage cur

The transformer copper loss refers to the loss which at the beginning of the secondary wire DC resistance creates, therefore only needs the transformer on to add on the nominal current then, the concrete operation is the secondary coil direct pipe nipple, adds the voltage on a side, amounts to until

Transformer copper loss means first-level conductor DC resistance caused by loss, therefore simply putting the rated transformer current can be specific actions is the secondary coil directly shorted, and voltage at a side, until current of rated current, measure primary voltage, primary voltage mul

Copper loss is the first level of the transformer DC resistance of the wire caused by loss, you only need to be on the transformers with rated current, specific actions are the secondary coil is shorted directly, on the primary side voltage increases, until the current of rated current is achieved,