|
关注：1
2013-05-23 12:21
求翻译：将“测量—校验”开关置于校验位置，测量与设定指针均应指示50%，误差不应大于0.5%是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
将“测量—校验”开关置于校验位置，测量与设定指针均应指示50%，误差不应大于0.5%
问题补充： |
|
2013-05-23 12:21:38
The "measurement - check" switch position calibration, measurement and set the pointer should indicate 50%, the error should not exceed 0.5%
|
|
2013-05-23 12:23:18
"Measurement" - a checksum will switch to checksum location, measurement and set-up pointer should be 50 per cent margin of error and instructions should not be larger than 0.5 %
|
|
2013-05-23 12:24:58
“The survey - verification” the switch will put in verifies the position, the survey and the hypothesis indicator should instruct 50%, the error should not be bigger than 0.5%
|
|
2013-05-23 12:26:38
"Measurement-calibration" switch on check location, measurements and set indicators should indicate 50%, error should not larger than 0.5%
|
|
2013-05-23 12:28:18
"Measure-check" verify placement of switch, measuring the set pointer should indicate the 50%, the error should not be greater than 0.5%
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
