|
关注：1
2013-05-23 12:21
求翻译：Applying still higher loads after the yield point has been reached causes the curve to rise again. After reaching a peak, the curve drops somewhat until finally the sample breaks, terminating the plot. The highest apparent stress taken from the stress-strain diagram is called the ultimate strength.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Applying still higher loads after the yield point has been reached causes the curve to rise again. After reaching a peak, the curve drops somewhat until finally the sample breaks, terminating the plot. The highest apparent stress taken from the stress-strain diagram is called the ultimate strength.
问题补充： |
|
2013-05-23 12:21:38
应用更高的负载已达到屈服点后会再次上升的曲线。达到高峰后，曲线有所下降，直到最后的样品休息，终止该地块。从应力应变图中所采取的最明显的应力称为极限强度。
|
|
2013-05-23 12:23:18
申请后仍然较高负荷的屈服点原因已达成的曲线,再次上升。 达到高峰后,直到最后的曲线有所下降的抽样时间、终止的阴谋。 强调采取的最明显的应力应变图是所谓的“最终兵力。
|
|
2013-05-23 12:24:58
应用更高的装载，在让步是被到达的起因再之后上升的曲线。 在到达峰顶以后，曲线滴下有些，直到样品最后打破，终止剧情。 从应力图采取的最高的明显的重音称强度极限。
|
|
2013-05-23 12:26:38
应用仍高负荷达到了屈服点之后会导致再次上升的曲线。后达到高峰，曲线滴有点直到最后样品断裂，终止情节。采取从应力应变关系图中的最高视应力称为极限强度。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
 |
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
