|
关注:1
2013-05-23 12:21
求翻译:The phase A,B and C signal names are required. The entered signal names must have the same name as assigned to a breaker or branch current. The CT component requires a current as input. If the entered signal names do not reference a branch or breaker current name, an error will be issued by the compiler.是什么意思?![]() ![]() The phase A,B and C signal names are required. The entered signal names must have the same name as assigned to a breaker or branch current. The CT component requires a current as input. If the entered signal names do not reference a branch or breaker current name, an error will be issued by the compiler.
问题补充: |
|
2013-05-23 12:21:38
阶段A,B和C信号名称是必需的。输入信号名称必须具有相同的名称分配给一个断路器或分支电流。 CT组件需要作为输入的电流。如果输入信号名称不引用一个分支或断路器电流的名字,一个由编译器会发出错误。
|
|
2013-05-23 12:23:18
该阶段A,B和C信号名称是需要。 进入信号的姓名必须有的同一名稱或科目前分配给一个断路器。 九号货柜码头的一部分需要目前的输入。 如果不提到的名字进入信号的分支机构或断路器目前的名称,将发出一个错误的编译器。
|
|
2013-05-23 12:24:58
需要阶段A, B和C信号名字。 被输入的信号名字必须有名字和被分配一样到破碎机或分支潮流。 CT组分要求潮流作为输入。 如果被输入的信号名字不参考分支或破碎机当前名字,错误将由编译器发布。
|
|
2013-05-23 12:26:38
二期 A、 B 和 C 信号所需的名称。由于分配给当前分支或断路器的输入的信号名称必须具有相同的名称。CT 组件要求输入电流。如果输入的信号名称不引用分支或断路器的当前名称,将由编译器发出错误消息。
|
|
2013-05-23 12:28:18
阶段A,B和C信号名称是必需的。输入信号名称必须具有相同的名称分配给一个断路器或分支
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区