求翻译：但当温度超过100℃时，垫可能会发生软化变形，此时轴承由于温度太高，已不能正常运转，所以我们的端盖密封垫和轴承组件的使用要求是吻合的。如果贵方需求P10材料端盖密封垫，我们也需要和我们的供应商特殊订购，这会产生订货费用和交期的问题，请综合考虑。是什么意思？

But when the temperature exceeds 100 ℃, the pad deformation softening may occur, then the bearing due to temperature is too high, they are not functioning, so we cover gasket and the bearing assembly requirements are consistent. If your party needs P10 material cover gasket, we also need our special

But when the temperature exceeds 100 °C pad when softened deformation may occur at this point in time, bearings due to temperature is too high, they are not functioning, so our end-sealing pad bearings and components for the use of matches. If your demand 10 P sealing pad material ends, we also need

But when the temperature surpasses 100℃, the pad possibly can have the conditioning to distort, because this time the bearing the temperature too is high, has not been able the normal work, therefore our end cover gasket and the bearing module operation requirements are tally.If the expensive side d

But when the temperature exceeds 100 ° c, softening and deformation may occur pads, bearings due to the high temperatures at this time, is not functioning, so we use requirements for end cover gaskets and bearings assemblies are consistent. If you demand P10 material end cover gaskets, our needs and

But when the temperature exceeds 100 ℃, the cushion may be softened and deformed, the bearing is too high at this moment because of the temperature, can't already run well, so the use that our end covers sealed cushion and bearing assembly has been required to be identical. If your demand P10 materi