|
关注：1
2013-05-23 12:21
求翻译：在硬件电路设计中，以 PIC16F76单片机的CCP单元为基础，利用其CCP单元的PWM功能，从CCP1引脚输出PWM信号经过7407驱动芯片，分成两路：是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
在硬件电路设计中，以 PIC16F76单片机的CCP单元为基础，利用其CCP单元的PWM功能，从CCP1引脚输出PWM信号经过7407驱动芯片，分成两路：
问题补充： |
|
2013-05-23 12:21:38
The hardware circuit design, the CCP to PIC16F76 microcontroller unit, based on the use of the CCP PWM function unit, a PWM signal from the CCP1 pin output driver chip through 7407, divided into two:
|
|
2013-05-23 12:23:18
In the hardware circuit design in 16, in order to PIC F CCP 76 microcontroller based module, making use of its functionality, PWM CCP modules from CCP PWM signal output pin 1 driver chip after 7407, and is divided into two paths:
|
|
2013-05-23 12:24:58
In the hardware circuit design, take PIC16F76 the monolithic integrated circuit CCP unit as the foundation, uses its CCP the unit the PWM function, outputs the PWM signal from the CCP1 pin to pass through 7407 actuation chips, divides into two groups:
|
|
2013-05-23 12:26:38
In the design of hardware circuit, to CCP PIC16F76 microcontroller unit based on PWM function with its CCP unit from CCP1 pin output PWM signal after 7,407 chips, divided into two routes:
|
|
2013-05-23 12:28:18
In the circuit design of the hardware, are based on unit CCP of PIC16F76 one-chip computer, utilize PWM function of its unit CCP, outputting PWM signal from CCP1 pin is driven the chip by 7407, is divided into No. two:
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
