|
关注：1
2013-05-23 12:21
求翻译：In order to stop the influx, the pump has to be switched to the constant rate mode and the discharge rate of the pump reduced to its initial rate. This causes the inlet pressure to the pump to build up. The increasing inlet pressure imposes back pressure on the annulus,是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
In order to stop the influx, the pump has to be switched to the constant rate mode and the discharge rate of the pump reduced to its initial rate. This causes the inlet pressure to the pump to build up. The increasing inlet pressure imposes back pressure on the annulus,
问题补充： |
|
2013-05-23 12:21:38
为了停止涌入，泵切换到恒定速率模式和放电率减少到其初始利率泵。这将导致建立的泵的进口压力。增加进口压力对上环的压力，
|
|
2013-05-23 12:23:18
为了阻止其流入,当泵切换到恒定速率模式的排放率和减少泵的其初始速度。 这将导致进口压力的泵,以建立。 越来越多的进口压力施加背压环、
|
|
2013-05-23 12:24:58
为了停止汇集，泵浦必须被交换到恒定的率方式和泵
|
|
2013-05-23 12:26:38
为了阻止涌入，泵已切换到恒定速率模式和放电率的降低到其初始速率的泵。这将导致建立泵进口压力。越来越多的进口压力施加反压上环，
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
