|
关注：1
2013-05-23 12:21
求翻译：測量時若被測目標點恰好在光軸上 則測量精度最低 此時我們就要調整攝像機的位置 使目標點偏離任何一個攝像機的光軸是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
測量時若被測目標點恰好在光軸上 則測量精度最低 此時我們就要調整攝像機的位置 使目標點偏離任何一個攝像機的光軸
问题补充： |
|
2013-05-23 12:21:38
Measurement if the measured target point on the optical axis is exactly at the lowest accuracy at this time we will adjust the camera position so that any deviation from the target point the camera optical axis
|
|
2013-05-23 12:23:18
If the measure measurements target points in optical axis, exactly the measurement precision minimum at this time we will be adjusted where the camera for any deviation from point a camera of optical axis
|
|
2013-05-23 12:24:58
When survey if were measured the target point the measuring accuracy is exactly lowest in the optical axis this time we to have to adjust the camera the position enable the target point to deviate any camera optical axis
|
|
2013-05-23 12:26:38
When measuring if the measured point happens to be in the lowest measurement accuracy in the optical axis at this time we will have to adjust the camera's position to target point deviation from any camera's optical axis
|
|
2013-05-23 12:28:18
测量时若被测目标点恰好在光轴上 则测量精度最低 此时我们就要调整摄像机的位置 使目标点偏离任何一个摄像机的光轴
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
