|
关注：1
2013-05-23 12:21
求翻译：If the cause of the pressure drop in the control chamber is due to the change of effective crosssection area of Am2 caused by cavitation, it is re-garded that the pressure in the control chamber pc will recover to the theoretical value by adjusting the load pressure pm at the bottom of the proportional poppet, which是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
If the cause of the pressure drop in the control chamber is due to the change of effective crosssection area of Am2 caused by cavitation, it is re-garded that the pressure in the control chamber pc will recover to the theoretical value by adjusting the load pressure pm at the bottom of the proportional poppet, which
问题补充： |
|
2013-05-23 12:21:38
如果在控制室内的压力下降的原因是由于AM2有效气蚀引起的断面面积变化的，它是重新garded，中控室PC的压力将通过调整负载压力恢复到理论值比例阀芯的底部时，从而导致气蚀的预防。因此，为了证明这个理论推导，实验，改变负载从0到6.5兆帕的压力时进行，使用的实验设置图。 13。
|
|
2013-05-23 12:23:18
如果原因控制腔压力下降是由于变化的有效crosssection区域所造成的am2的模腔,它进行了重新的文档中,在压力控制腔的理论价值将电脑恢复到由调整负荷的底部压力时按比例提升,这导致了气穴现象的预防。
|
|
2013-05-23 12:24:58
|
|
2013-05-23 12:26:38
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
