|
关注：1
2013-05-23 12:21
求翻译：We confirmed with Jinfen the qualification is not needed. However, we found pipe ID oversize at the big end as the below table. We found the reason is that the madrels are for TF pipes. So there’s a joint at the big end of the madrel. You may refer to the attached mandrel drawings. After cutting the extra pipe at two e是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
We confirmed with Jinfen the qualification is not needed. However, we found pipe ID oversize at the big end as the below table. We found the reason is that the madrels are for TF pipes. So there’s a joint at the big end of the madrel. You may refer to the attached mandrel drawings. After cutting the extra pipe at two e
问题补充： |
|
2013-05-23 12:21:38
正在翻译，请等待...
|
|
2013-05-23 12:23:18
我们的资格确认,不需要jinfen。 但是,我们发现在大端管内径尺寸过大,如下表。 我们发现这是因为madrels是tf喉管。 因此,这里就存在一个共同的大端的madrel的。 您可以参阅心轴连接图。 裁切后的额外两个端点处的管道,管内径尺寸过大的找到我们的大目标。
|
|
2013-05-23 12:24:58
我们证实了与资格不是需要的Jinfen。 然而，我们发现了管子ID特大在大端作为下面桌。 我们发现了原因是madrels是为TF管子。 因此有联接在madrel的大端。 您可以提到附上轴图画。 在切开额外管子以后在%
|
|
2013-05-23 12:26:38
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
