当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:If you are intending to use only helicopter you may skip the aircraft section by . You will need a switch in order to use the Autorotation function. If your radio won't provide a switch, you may leave this function blank. In this case you can use autorotation pressing the -key. You can modify the gyro sensibility during flight using a proportional channel. If your radio doesn't have a spare proportional channel, the REFLEX software generates a suitable value. Another alternative is available using the Channel display and modify the assigned but unavailable channel for the gyro using the mouse or cursor keys. If you want to use your radio's mixers for throttle, pitch and tail rotor, you need to assign a channel for throttle control. Details on the usage of radio based mixers for throttle and pitch are available in the Model parameter dialog.是什么意思?

待解决 悬赏分:1 - 离问题结束还有
If you are intending to use only helicopter you may skip the aircraft section by . You will need a switch in order to use the Autorotation function. If your radio won't provide a switch, you may leave this function blank. In this case you can use autorotation pressing the -key. You can modify the gyro sensibility during flight using a proportional channel. If your radio doesn't have a spare proportional channel, the REFLEX software generates a suitable value. Another alternative is available using the Channel display and modify the assigned but unavailable channel for the gyro using the mouse or cursor keys. If you want to use your radio's mixers for throttle, pitch and tail rotor, you need to assign a channel for throttle control. Details on the usage of radio based mixers for throttle and pitch are available in the Model parameter dialog.
问题补充:

  • 匿名
2013-05-23 12:26:38
如果您打算使用仅直升机可跳过飞机节,由<tab>。要使用自转功能,将需要一个开关。如果你的收音机不会提供一个开关,可将此函数保留为空。在这种情况下,您可以使用自转按<a>-键。使用比例通道的飞行过程中,您可以修改陀螺敏感性。如果您的电台没有备用的比例通道,反射软件会生成一个合适的值。另一种选择是使用通道显示<f8>和修改已分配但不可用的通道,使用鼠标或光标键的陀螺。如果您要使用你的收音机搅拌机节气门、 沥青、 尾旋翼,您需要分配油门控制通道。无线电的用法的详细信息基于搅拌车的油门和间距可在模型参数对话框的。</f8></a></tab>
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭