|
关注：1
2026-06-27
求翻译：The decreased transition length for the L1M and L1A blades is likely due to the more aggressive deceleration of the mean flow noted in the cp profile. Figure 6 plots the acceleration parameter K on the suction surface for each of the three blades calculated using the pre-dicted cp distributions shown in Fig. 1.是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
The decreased transition length for the L1M and L1A blades is likely due to the more aggressive deceleration of the mean flow noted in the cp profile. Figure 6 plots the acceleration parameter K on the suction surface for each of the three blades calculated using the pre-dicted cp distributions shown in Fig. 1.
问题补充： |
|
2013-05-23 12:21:38
正在翻译，请等待...
|
|
2013-05-23 12:23:18
正在翻译，请等待...
|
|
2013-05-23 12:24:58
减少的转折长度为L1M和L1A刀片可能归结于在控制点外形注意的卑鄙流程的更加进取的减速。 图6在吸表面密谋加速度参量 K 为使用被预言的控制点发行被计算的每一把三把刀片显示在。 1.
|
|
2013-05-23 12:26:38
正在翻译，请等待...
|
|
2013-05-23 12:28:18
对 L1M 和 L1A 刀片为的减少的过渡长度由于在 cp 简介中被注意的平均的流动的越多具竞争性减速是可能的。Figure 6 plots the acceleration parameter K on the suction surface for each of the three blades calculated using the pre-dicted cp distributions shown in Fig.1.
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
