|
关注:1
2013-05-23 12:21
求翻译:将混合好的胶均匀地刷涂在试件表面,一般刷涂2~3遍,每遍刷涂厚度为0.2-0.3mm,刷涂第一遍后要等涂层表干后在进行下一次刷涂,整个刷涂过程一般刷涂0.5-0.8mm是什么意思? 待解决
悬赏分:1
- 离问题结束还有
将混合好的胶均匀地刷涂在试件表面,一般刷涂2~3遍,每遍刷涂厚度为0.2-0.3mm,刷涂第一遍后要等涂层表干后在进行下一次刷涂,整个刷涂过程一般刷涂0.5-0.8mm
问题补充: |
|
2013-05-23 12:21:38
Mixed good glue evenly brush the specimen surface, generally brush 2 to 3 times each over the brush thickness 0.2-0.3mm, brush the first pass after the coating is dry after carrying out the next brushing, the brushing process generally brush 0.5-0.8mm
|
|
2013-05-23 12:23:18
正在翻译,请等待...
|
|
2013-05-23 12:24:58
Will mix the rubber even floor brush will spread in the test sample surface, will brush generally spreads 2~3, each will brush spreads thickness will be 0.2-0.3mm, after will brush spreads first must wait for the coating table to do is carrying on next time brushes spreads, entire will brush spreads
|
|
2013-05-23 12:26:38
Plastic floor brush evenly coated with mixed well in the specimen surface, General brush 2~3 again, per-brush coating thickness 0.2-0.3mm, brush after the coated surface dry after the first pass, the next brush, the entire brushing process typically brush 0.5-0.8mm
|
|
2013-05-23 12:28:18
正在翻译,请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区