|
关注：1
2013-05-23 12:21
求翻译：当其它焊接参数一定时，改变搅拌头的下压量为0.4~0.8mm，焊接接头的抗剪切力随着下压量的增加先是逐渐增大，在0.7mm时达到最大值为4.448KN是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
当其它焊接参数一定时，改变搅拌头的下压量为0.4~0.8mm，焊接接头的抗剪切力随着下压量的增加先是逐渐增大，在0.7mm时达到最大值为4.448KN
问题补充： |
|
2013-05-23 12:21:38
The other welding parameters must change the amount of pressure mixing head is 0.4 ~ 0.8mm, welded joints, shear bond strength with increasing amount of pressure is first gradually increasing in 0.7mm maximum 4.448kn
|
|
2013-05-23 12:23:18
When the other welding parameters, change the timing of the mixing head pressure of 0.4 to 0.8 mm, and the solder joint shear resistance as the pressure is increased to gradually increase in 0.7 mm, the maximum value is 4.448 KN
|
|
2013-05-23 12:24:58
When other welding parameter certain, change agitation head under presses the quantity is 0.4~0.8mm, the weld joint anti-shearing force presses the quantity along with under the increase is first increases gradually, when 0.7mm the maximizing is 4.448KN
|
|
2013-05-23 12:26:38
When the other welding parameters when you must, change PIN under the pressure of 0.4~0.8mm, resistance of welded joints under shear stress along with the increase in pressure increases, when 0.7mm reaches the maximum value of 4.448KN
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
